A wide range of automatic product feeding systems is available for any of the High Speed Wrappers. We offer both continuous flow infeeds and multipacking infeeds, which accumulate and/or collate and feed groupings of product into Shanklin® Shrink Packaging Machines.
Shanklin Omni® Wrapper: Shanklin Omni® Infeed Modules Stand Alone: Belted Flighted Flight Bar Continuous Synchronic Harmonic Timing Screw Multipacking: Models F-1M & F-3M Wide Flight Bar
Continuous Flow Infeeds
As the speeds of horizontal Form-Fill-Seal machines increase, the mechanism that feeds the products into the wrapping machine becomes an increasingly important component of a successful packaging line. The infeeds shown here feed product into Shanklin® Packaging Machines while maintaining a truly continuous flow of product to and through the machine. The line of product waiting to be wrapped is free from the harsh start-stop motion associated with many product feed systems, and product flow is smooth and in a straight line.
The Shanklin® Synchronic Infeed uses a control conveyor and infeed conveyor similar to the Harmonic Infeed, described below, but it is designed to feed any Shanklin® High Speed Automatic Wrapper. The flighted conveyor of the machine is retained, and a sophisticated control system senses the location of the infeeding product and adjusts it automatically so that the product will be deposited between the flights of the wrapping machine’s infeed conveyor. Speeds exceeding 200 products/min. have been achieved with this infeed. The sophisticated control system of the Synchronic Infeed permits feeding of multiple products into a single flight space for in-line multipacking.
The Shanklin® Harmonic Infeed is installed on Shanklin® HS-1, HS-2, F-4 and F-5 Wrappers in place of the flighted infeed conveyor. The Harmonic Infeed feeds product at the proper rate to produce the proper spacing between products. Photocell controlled end seal jaws seal the film between the packages automatically. A special Shanklin® Infeed Conveyor (recommended accessory ) feeds product i nto the Harmonic Infeed.system senses the location of the infeeding product and adjusts it automatically so that the product will be deposited between the flights of the wrapping machine's infeed conveyor. Speeds exceeding 200 products/min. have been achieved with this infeed. The sophisticated control system of the Synchronic Infeed permits feeding of multiple products into a single flight space for in-line multipacking.
Harmonic Infeed - Side Belt
The Shanklin® Harmonic Infeed is an optional side belt model for applications that cannot be controlled by the overhead belt on the standard model. This same configuration is available as an option for the Synchronic Infeed.
The Shanklin® Timing Screw Infeed can be used to feed product into the flighted infeed conveyor of any Shanklin® High Speed Wrapping Machine. It is particularly suited for round product (cans, jars, etc. ) or product with rounded corners. This infeed can be configured to accumulate groupings of product for synchronized delivery to the wrapping machine.
F-1M and F-3M Multipacking Infeeds
Use alternating stops on the infeed conveyors to accumulate groupings of product and then release the groupings automatically into the wrapping machine.
Where maximum versatility with minimum changeover time is a primary concern, a manually fed infeed conveyor is often used. The Shanklin® Wide Flight Bar Infeed is ideal for this purpose. Product is placed between the flight bars and is carried into the wrapper automatically. Adjustable side guides are quickly set for the width of the products. This infeed is also designed to feed single products and irregularly shaped products.
Stand Alone Infeeds
Shanklin® Stand Alone Infeeds can increase output on automatic wrappers by 50% or more! By pacing the operation speeds, Belted, Flighted and Flight Bar Infeeds can maximize your throughput on Shanklin® Automatic L Sealers and Triumph Form-Fill-Seal wrappers. Worth every penny, Shanklin® Stand Alone infeeds often pay for themselves in months!
Product Separating Infeeds are available in 27", 33", 48" and 72" length. With variable width, they are a great match for many of our Shanklin® Wrappers. They're also available in Stainless Steel for Food, Produce and Cold Room environments.
Flighted Infeeds are a great way to speed up production on Shrink Packaging lines. These flight lug infeeds are available standard in 4 and 8' lengths with the ability to go as long you'd like in 4' increments. Shanklin® Flighted Infeeds are also available in Stainless steel construction.
Flight Bar Infeeds are perfect for staging multi-packs into Shanklin® Wrappers. Available in 6' increments, we'll build the Flight Bar Infeed that meets your production needs. Shanklin® Flight Bar Infeeds are also available in Stainless Steel construction.
The Synchronic, Harmonic and Timing Belt Infeeds above can be modified for multipacking operations
Product specifications, brands and availablity may vary depending on your geographic location. Refer to the country selector at the top of this page to browse products in your region.